Home›Home & DIY Tools
Home Improvement Toolkit

Home & DIY
Calculators

Plan your next home improvement project with confidence. Calculate concrete, roofing, tile, mulch, gravel, square footage, and stair layouts — free, instant, and accurate.

7
Tools
100%
Free
0
Sign-up Needed
Advertisement
Concrete Calculator
Cubic yards & bags for slabs, footings, columns
Roofing Calculator
Roofing squares & shingle bundles from pitch
Tile Calculator
Tiles & boxes needed for floors and walls
Mulch Calculator
Cubic yards & bags for garden beds
Gravel Calculator
Cubic yards & tons for driveways and paths
Square Footage Calculator
Total area for multi-section rooms
Stair Calculator
Rise, run & stringer length for staircases
⚠️

Disclaimer: These calculators provide estimates for DIY planning purposes only and are not engineering, contracting, or building-code advice. Always add a reasonable waste allowance, verify quantities with your supplier, and consult a licensed contractor for structural or code-critical work.

About Our Home & DIY Calculators

Every home improvement project starts with a material estimate — and getting it wrong means either an expensive re-order or wasted materials sitting in your garage. Our Home & DIY Calculators take the guesswork out of concrete pours, roofing jobs, tiling, mulching, gravel driveways, room measurements, and staircase framing.

Each calculator below is a dedicated tool with its own worked formula, waste-allowance guidance, and frequently asked questions — built for homeowners, DIYers, and contractors who want a fast, accurate second opinion before ordering materials.

Frequently Asked Questions

Multiply the slab's length by width by depth (in feet), then convert to cubic yards by dividing by 27. Our Concrete Calculator does this automatically and also converts to 60lb/80lb bag counts.
Roof pitch is expressed as rise per 12 inches of run (e.g. 6/12). The steeper the pitch, the more actual surface area your roof has compared to its flat footprint — our Roofing Calculator applies the correct multiplier automatically.
Divide your room area by the area of one tile, then add 10-15% for cuts and breakage. Our Tile Calculator handles this and also tells you how many boxes to buy.
A structural driveway base typically needs 4-6 inches of compacted gravel. Decorative paths need only about 2 inches. Our Gravel Calculator converts your area and depth into tons to order.
Advertisement